Media Library / Images

ZVA 25 for AVGAS

red scuffguard, AVGAS sticker; Slimline hose assembly

Oasis manifold, ball valves - Biogas

Elaflex Hamburg

Hose stock

Railtanker

MannTek DDC-V 80 F Dry Disconnect Couplings (tank unit with flange), Pressure Caps PN 25 with pressure relief

LPG Autogas dispenser, ZVG 2 ACME nozzle, LPG 16 dispensing hose

SD / Pyropal 230 saturated steam hose

Elaflex Hiby Tanktechnik, Production Plettenberg / Germany

Assembling hall, meterial logistics

ZVA 25, bus refuelling

VSR vacuum support ring for ERV Rubber Expansion Joints

to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

ContiTech Production hose

secondary braid

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Fuel Grade Identification to EN 16942 standard, direct print on product badges for ZVA Nozzles

ERV Rubber Expansion Joints

Picture 3

Chemical Hose Reel with manual rewind system blue, UTS 50, ZV 400

for alcohol

IBC connection with reducer RS S100x3" SS

MannTek DDC-V 80, DDC-M 80, FWS 75 PP

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

HB 50 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

Marine bunkering and cargo hoses

ship to ship cargo transfer

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

SBC-C 50-2"

MannTek Safety Breakaway Coupling with cable release, 2" female BSP connection

DDC Dry Disconnect Couplings for chemicals

Rail tanker loading/unloading

Movable Storage Hose Reel with manual rewind system white, HD 38, ZV 400

customised

Boat refuelling Australia

ZVA Slimline 2, Slimline hose assembly

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

Ship loading with chemicals

UTS 150 hose assembly, ARK-S Safety Break Coupling

ZVA Slimline 2 GR, SG-COAX, ZVA SLimline 2, SG 1" Al

Multi Product Dispenser with / without vapour recovery; nozzles with Sight Glass