Media Library / Images

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

SBS 250 - marine cargo hoses with built-in nipples

heavy standard bunkering hose to EN 1765, category S 15

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Wear Advice

VHD 50

SC 75

Spannloc clamps DN 75 of aluminium

ZVG 2 ACME / EURO / DISH

Nozzles for L.P. Gas (Autogas) refuelling

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

Oasis FV103 45° Fill Valve with NC 203 P36 Nozzle, for CNG

ELAFLEX Hamburg

Nozzle stock, ZVA Slimline 2 GR

Polypal Clean hose assembly

Pharmaceutical production

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

VB 50 SS

TW dust plug, stainless steel

CHD 25

Lilac Band chemical hose without helix, DN 25

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Oasis manifold, ball valves - Biogas

ERV-ROTEX expansion joint, hot water pumping system

ERV-G

Pump-tank connection; lateral offset

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

H2 Hydrogen

ERV-H2+ PN 25, DN 80 und DN 100

LBS 50 foodstuff hose, RMC 50 SS foodstuff fitting with Spannloc of stainless steel

Aseptic bulk filling

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

M 63 2½" SS, VD 76/63 PU

Hose coupling with female thread

TWD-TM coupling seal

PTFE encapsulated

ZVF 50 JET overwing refuelling

LeverAssist hold-open aid for comfortable refuelling

Petrol station in Singapore

ZVA Slimline 2 nozzle with Splashguard, SSB 16 Safety Break, Slimline hose assemblies

ZVA Slimline 2 GRVP - spout with vapour suction inlet

LPG Autogas Adapter (filler inlet) ACME

ACME thread 1 3/4"

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

IBC loading and unloading

MannTek DDC-M 50, FWS 50 PTFE