Media Library / Images

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ERV VSRV:

ERV with bolted vacuum support ring. For maximal vacuum resistance of the selected ERV. Bolted ring in stainless steel AISI 316 Ti.

Polypal Plus 50 universal hose

with seamless, black, conductive UPE lining. For almost all liquid and pasty chemical and petroleum based products and solvents. Meets EN 12115.

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

Fluorline EFL 16

Universal pump hose DN 16 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range -40 °C to +100 °C. Burst pressure > 64 bar.

GasGuard LPG / Autogas refuelling equipment

Nozzles, nozzle boot for dispenser installation, LPG 16 hose assemblies, Safety Break ARK 19

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

SPANNLOC bolted safety clamps of aluminium

SC 75 Al

Hose Assemblies with Flange - Elapac seals

On board of an aircraft refueller: TW-hose, Spannloc flanged coupling; flange seal: Elapac.

IBC Adapter RS S60x2 SS

ZVF 50 JET

with HD-C NEON hose assembly

TGN 4" Al tank truck flange with threaded nipple, VK 100 Ms male TW coupler, MB 100 Al dust cap, chain

Alternative fuels: B 20 (Diesel with up to 20% Biodiesel), E 85 (Gasoline with up to 85% Ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR

ELAFLEX Hamburg

Construction

LNG Refuelling

LNG Safety Break SB-LNG VL SB-LNG FL

ZV 19.1 TD

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), up to 100 ltr./min. Special version for chemicals/solvents with PTFE seals.

Vergleich visibility aircraft refuelling hoses - below: "Yellow Band" standard, top: "NEON" new version with reflecting bands

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room; Netherlands

TSVX 50

Hose connectors with double shank of hot stamped brass, with Spannfix safety clamps of hot stamped aluminium.

Urea loading of a petrol station tank

UTS hose assembly, DDC-M 50 SS Dry Disconnect coupling

ELAPHARM and Tecnopal hose assemblies

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG20 ACME nozzle

Slimline 21 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ELAFLEX Hamburg

Manufacturing bronze corrugated pipes

SL 16 for AdBlue® hose assemblies

black or blue; specially made for urea solution (DEF, ARLA)

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

ELAFLEX refuelling equipment:

Quality is in the detail.

ZVA 25 with red scuffguard and Slimline hose assembly

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

ZVF 50 JET overwing refuelling

with HD-C hose assembly

Elaflon Plus FEP

Quality is in the detail.