Media Library / Images

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Connection road tanker to trailer: TW hose assembly, DDC Dry Disconnect Coupling

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room; Netherlands

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner.

Construction site / on site refuelling:

ZVA 25 (automatic nozzle), road tanker

VC 75-3" SS / SS

Spannloc threaded hose coupling with BSP male thread / Spannloc of stainless steel

LMD 25 Blue Band solvent hose

without helix

Hose Reel with HD 38, ZVA 25, Bonding Reel red

Mobile Cabinet, airfield refuelling

Oasis TM106 Trailer Unloading Manifold, for CNG

Slimline 16 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ZVA Slimline 2, dispenser

Estonia

Camlock Cam Locking Coupling AMK 50 Ms (brass)

Polypal Oil 75

Universal chemical hose special type with petroleum resistant cover of Chloroprene (CR). Suitable e.g. as gantry hose (road tanker loading).

Equipment truck for dangerous goods accidents, Elaflon PTFE universal hose assembly, DDC Dry Disconnect Coupling

ROTEX 200.10 SS TAS

Rubber Expansion Joint with PTFE lining and PTFE vakuum support ring

ELAFLEX refuelling equipment for AdBlue urea solution

ContiTech Production hose

Dispensing hose, after mandrel removal, before coiling

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Oasis NC 103-200 Bus & Truck Nozzle

RS 21/2 x3 SS

Reducer Female/Male

ContiTech Production hose

Dispensing hose, removal of mandrel

ZVA-GBZ

Automatic nozzle ZVA DN 19, of cast bronze (GBZ), for drinking alcohol, brandy etc. Flowrate up to 60 l / min.

SSB 16 Safety Break: Abriss

Integrated Diesel Drip Catcher for ZVA Slimline 2

Camlock hose couplings: system comparison

right hand side - industry standard, with cable tighteners to fix levers. Left hand side: Easyloc from Elaflex with automatically secured levers.

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

LNG Refuelling

Remove N-LNG Nozzle

ERV Rubber Expansion Joints with different flange types / flange materials