Media Library / Images

Elaflex Pacific (Australia)

Functioning test GasGuard nozzle

ZVA Slimline 2 GR, special type with bellows, black, guard 3 - side view

ERV-R 50.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Ferrule threaded hose coupling M 19-1" cr

for petrol station dispensing hoses

ContiTech Production ERV

Calender, woven fabric

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Camlock couplings:

stainless steel female and male couplings to EN 14420 - 7

Ball Valve 350 bar

for Hydrogen

PHD 100, airport depot

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

Marking of High Temperature Types ZVA Slimline 2 / ZVA Slimline 2 GR

For regions with exceptionally hot summer conditions which may lead to particularly high fuel temperatures we offer High Temperature (HT) nozzle types, available for ZVA Slimline 2 and ZVA Slimline 2 GR.

FHD 50 special type HIFR

(helicopter in flight refuelling)

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Alternative fuels: HVO (hydrotreated vegetable oil) and E 85 (gasoline with up to 85% ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50 F, DGC-M 80-3", DGC-M 50-2", LPG hose

ZVG 2 EURO UL

L.P.Gas nozzle for Autogas refuelling with propane, butane and their mixtures - with "EURO" connector; UL listed.

KWZ x MK 80-32°

Rail car adapter with TW coupler, bent lever

ZVA Slimline 2, dispenser

MC 38-11/2" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

Upstream Oil Industry, TW hose assemblies

Kuwait

ZH 50 nozzle with MK50SS + HD hose assembly, DDC-V 80 Ms with cap, MK 80 Ms with VB 80 P

ELAFLEX Hamburg

Main building / entrance

Rail car adapter type KWZ, one end with rail car thread 5½, other end 3" male BSP

Production plastic parts

Injection Molding

Elaflon Plus FEP hose assemblies, one side open end

up to DN 50 grey cover / from DN 63 black cover

Hoses for Liquefied Petroleum Gas / Autogas

LPG 13, LPG 16 black/orange, LPG 19

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.