Media Library / Images

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Tank storage, mixer: LTW hose assemblies

DAC-V 65, DAC-M 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading - with and without sight glass

Flame protection cover FSH for ERV rubber expansion joints

ContiTech Production hose

Dispensing hose, removal of TPX coating after vulcanisation

DAC-V 65

MannTek Dry Aviation Coupling

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

AMK-St 50 SS, AVK-St 50 SS

'Camlock' stainless steel female and male hose tails to EN 14420 - 7

MannTek Safety Breakaway Coupling SBC 80 SS

with female thread BSP connection

SG-COAX_Al

Sight Glass, to EN 13617-1, for ZVA Slimline 2 GR with vapour recovery. Installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised fuels.

Urea solution filling for light vehicles - parallel to Diesel refuelling

ZVA AdBlue LV / ZVA Slimline 2

ELAFLEX refuelling equipment:

Quality is in the detail.

Oasis EC100 electrically isolating couplers for CNG

VB 80 Al

TW dust plug, aluminium

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

Ship cargo loading with FWS-PP composite hoses

VSR vacuum support ring for ERV Rubber Expansion Joints

to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

Elaflex AB, Sweden

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room of a ferry

Ship bunkering with LNG

CBC Cryogenic Breakaway Coupling from MannTek and hose assembly for cryogenic media

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Aircraft refuelling: MannTek sampling unit in hydrant system

ERV-G

Ship engine room: 2 Yellow Band Expansion Joints mounted together for extra permissable movement

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly

Hose Reels electrical rewind system yellow

for water

Assembling "ZS" tie rods to ERV rubber expansion joints

Elaflon Plus FEP

Embossed hose marking

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

Ship loading Naphta - STW 150 hose assemblies