Media Library / Images

EN 12115 hoses: colour marking

Lightweight Gravity Discharge Road Tanker Hose LG 4"

with TW coupling (VK 100)

Elaflon Plus FEP hose assembly, crimped foodstuff fitting

DDC-M 25-1" SS

MannTek Dry Disconnect Coupling, DN 25, stainless steel

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, green.

Locomotive refuelling

Dispenser, ZV 32 DB nozzles with Renk coupling

Hose assembly for petroleum based products

LTW 75, VC 75-3", DDC-M 80-3"

Rail tanker unloading of petroleum based products

FWS PP St/St composite hose, MannTek Dry Disconnect Coupling, KWZ adapter

ZVF 50 UL91 overwing refuelling

UL 91: new unleaded aviation fuel - identification colour green

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

DCC Dry Cryogenic Coupling for LNG

Coupling process

ERV-R 80.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ZVA Slimline 2 GR, black, guard 3 - top view

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps) and LMS solvent hose. Direct connection of a hose assembly to the IBC.

PAL hose assemblies:

PCD 32 / RMC-SS, Butapal 32 / ACMX, Polypal Plus 50 / SFC 50 SS, Tecnopal 38 / MKX-SS, Pyropal 38 / MC38

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter Hebelarmkupplungen AVK 50 SS/Vi x VK 50 SS/Vi, AMK 50 SS/Vi x VK 50 SS/Vi, AVK 75 SS/Vi x VK 50 SS/Vi

ERV ZSS:

Tied Flanges – Tie rods with inner and outer limitation

Filling of Heating Oil Tanks: Adapter KR 50-21/2"

for difficult to reach filler inlets

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

Unloading petroleum products at the service station (road tanker to UST)

LG hose assembly for gravity discharge

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Safety Crimping Ferrule of stainless steel

SH 50 SS

MK 100-90° SS

Special type with bent lever

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO, LPG 16 hose; Spain

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ZVF 50 UL 91 / green

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

SPANNLOC bolted Sicherheits Klemmbacken aus aluminium

SC 75 Al

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

MannTek Dry Disconnect Couplings:

DDC-V 50-2", DDC-V 50 F, DDC-M 50-2", DDC-M 80-3"