Media Library / Images

CNG Safety Break with Extention 'EL' (Extended Length) SB-CNG FLVL-EL-J

 SB-CNG FLVL-EL-J

M-St 50 SSE

Female threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

LeverAssist hold-open aid for ZVA Slimline 2 nozzles

ERV Rubber Expansion Joints with different flange types / flange materials

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Elaflon Plus FEP hose assembly, FFC-SS fixed hose flange

Camlock Cam Locking Coupling AMK 50 Ms (brass)

Multi Product Dispenser with ZVA Slimline 2 nozzles, SSB 16 Safety Breaks with BS 16 Break Sleeves

ERV-G ... TW

Aircraft refueller

Storz Safety Coupling SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Graphic, components of a ZVA Slimline 2 GR nozzle for vapour recovery

FGN 2 St

Flange with male thread, steel zinc plated/chromated

Easy Rotating Safety Swivel Break, Type 'ERS'

SSB 16 ERS

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly and AVGAS sticker (decal)

ERV-G 1000, ERV-BR 300

ELAFLEX Hamburg

Assembling Spannfix hose clamps

DAC-V 65

Aircraft refueller, Dry Aircraft Coupling to ISO 45 for bottom loading

Elaflon PTFE

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

FFBV 80, DAC-V 65, DAC-K 2 1/2" Al

MannTek Full Flow Ballvalves (FFBV), one way

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, bonding cable

Swivel EA 075 A f. ZVA AdBlue HV

new design

Road tanker with open hose reel, HD hose assembly, ZV 500 nozzle

Hose with SC 50 SS Spannloc stainless steel clamps - corrosion protection against road salt

DDC-M 25-1" SS

MannTek Dry Disconnect Coupling, DN 25, stainless steel

Slimline 16 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Aircraft Refuelling Skid

HD-C hose assembly, ZVA 32 nozzle, SG1Al sight glass, hose reel made by ELAFLEX Italy

DAC-V 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading

LH2 Refuelling

'N-LH2' nozzle for LH2 truck refuelling of cryogenic hydrogen

PHD 63

Aircraft refuelling hose special type with non metallic plastic helix and thick wall for enhanced lateral stability. Burst pressure > 80 bar

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).