Media Library / Images

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

ZVF 50 PTL (Push-Twist-Lock), strainer inspection

ERV-CR ... ZS

"CR" Rubber Expansion Joints; water purification plant

Universal hose assembly UTL 63 with VC 63-3" SS / SS and MK-A 80 SS

Elaflex refuelling equipment:

Quality is in the detail.

RS 3/4 x 1 SS

Reducer Female/Male

Elaflex Hiby Tanktechnik, Production Plettenberg / Germany

Plettenberg factory 2

TSVX 50

Hose connectors with double shank of hot stamped brass, with Spannfix safety clamps of hot stamped aluminium.

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

SG 80-TW1 Al

Sight glass with rods, with TW flanges to DIN 28460

SL 16 AdBlue (blue) hose assembly with anti-kinking sleeve, colour sleeve

Elaflex hoses

TW, PTFE, LPG, FEP, UTS, PCS, CHS

ERV ZS:

Tied Flanges – Type ZS, Tie rods with outer limitation in rubber bushings

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with (top) and without vapour recovery (below)

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

AN 2 Al

Welding nipple aluminium

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ZH 50.2

High performance manual operated dispensing nozzle, for Diesel, heating oil, viscous gear and motor oils, max. flowrate 450 litres/min.

Hose assemblies

Universal hose UTS 50 with DDC-M 50-2"; Tanker hose for petroleum based products LTW 75 with DDC-M 80-3"

SG-COAX

Sight Glass for ZVA Slimline 2 GR

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

ZVF 50 JET for aircraft refuelling

MK 80 Ms

TW coupler of brass, to EN 144260-6 with 3" female BSP connection

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

Airfield fixinstallation: Hose Reels JET, AVGAS

Type HD-C, aviation hose, ZVA 32

Elaflex Hamburg

Stock commisioning system

Hose assemblies

Polypal Clean with RMC, LPG with ACMX, Polypal Plus with SFC-SS, Tecnopal with MK-SS

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room; Netherlands

Coax hose assembly, section view