Media Library / Images

Sideway storage of hose assemblies, tank truck for petrol station delivery

LG 3" hose assembly for gravity discharge, LG 2" hose assembly for vapour balance

Camlock Cam Locking male adapter AVK 50-2" Ms (brass)

Elapharm EPH 25 with foodstuff fitting DIN 11551, free of dead spaces

V-St 50 SSE

Male threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Connection UTS hose assembly

Belgium

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

PHD-F aircraft refuelling hose

PHD 63 F

Cargo loading / unloading of ship, STW 150, Vapour Line

Italy

H2 Hydrogen

H2 25 D Hydrogen hose, SFC 25, MX 25, VH 2

ELAFLEX Hamburg

ERV marking after test

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, yellow.

DCC Dry Cryogenic Coupling for LNG

Coupling process

Hose Assemblies with Flange - Elapac seals

On board of an aircraft refueller: TW-hose, Spannloc flanged coupling; flange seal: Elapac.

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Trailer Inline Safety Breaks

IB108

Manufacturing warm forged parts

Example SC 150 Spannloc clamp

Ball Valve 350 bar

for Hydrogen

ELAFLEX Hamburg

Coax hose assembling, colours

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

IBC loading

MannTek DDC-M 50, FWS 50 PTFE

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

KSS-SD of stainless steel

for saturated steam hoses. These hose assemblies are subject to high wear. The main stress area for hose assemblies is also at the joint end is protected.

GasGuard LPG nozzle GG1E

eoconomic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 3

Ship bunkering

FHD hose assembly, flange connection

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

ZVA HV for AdBlue®, SL 16 for AdBlue®, Elafix 40 / Elafix 40 Anti-Siphon

Urea solution (DEF, ARLA 32) for trucks: nozzle, hose assembly and adapter (with/without anti-theft protection) for the vehicle AdBlue^® filler inlet to avoid misfuellings.

Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

HD-C, ZVF 50, Refueller

Aircraft refueller, overwing refuelling JET