Media Library / Images

ERV with FSH:

Flame protection cover (closed)

MannTek DCC-V & DCC-M Dry Cryogenic Couplings

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50-2" with DDC-S dust plug

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Plettenberg factory 2

ELAFLEX Hamburg

Manufacturing bronze corrugated pipes

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner.

Ferrule threaded hose coupling M 25-1" SS

for petrol station dispensing hoses, chemical hoses, AdBlue^® urea solution

VB 100 ADR Al with pressure relief

Plug for MK 100
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

EA 075, EA 318, EA 375

Swivel

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, bonding cable

ELAPHARM and SD Pyropal steam hose

Pharmaceutical production

Aircraft refuelling

Carter Underwing Nozzle, HD 63 C Neon, ZVF 50 AVGAS, SC 50 Al, HD 50 C, Hose Bead BD 50

SG 1 1x0 SS for Nozzles for AdBlue®

Attach on dispenser side of swivel

AMK-St 38 SSE

Camlock female coupler, hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

DDC-M 25-1" SS

MannTek Dry Disconnect Coupling, DN 25, stainless steel

Slimline 21 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ZVA Slimline 2

Automatic nozzle DN 19, for flowrate max. 80 l / min. Green Product Sleeve and Scuffguard, Slimline dispensing hose assembly

Slimline quality dispensing hose for the forecourt

SL 21 red

ZVA Slimline 2 and ZVA Slimline 2 GR with sight glasses, Slimline hose assemblies

Petrol station, Czech Republic

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Elapharm EPH 25 OHM-G

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

PHD 63

Aircraft refuelling hose special type with non metallic plastic helix and thick wall for enhanced lateral stability. Burst pressure > 80 bar

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

ELAFLEX Hamburg

Assembling ERV limiters (tie rods) with spherical discs and conical seats

ERV-G ... TW

Aircraft refueller

LPG Autogas Adapter (filler inlet) DISH

"Italian" claw coupling