Media Library / Images

Oasis NC 103-200 Bus & Truck Nozzle

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

UTL 50 universal chemical hose assembly with KSS anti-kinking-spiral

and DDC Dry Disconnect Coupling

ERV ZS:

Tied Flanges – Type ZS, Tie rods with outer limitation in rubber bushings

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

FF-St 80 SSE

Fixed flange hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Check Valve 350 bar

for Hydrogen

Production MannTek, Sweden

Fixed Flange and hose tail of stailess steel

SFC 63.16 SS

DDC-V 50 SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with BSP thread connection

ELAFLEX Hamburg

Assembling Spannfix hose clamps

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA HV for AdBlue®

new design

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, MKX 80 female TW coupler

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

DEC – Dry Evotek Coupling

Dry disconnect coupling for the chemical industry

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Underwing refuelling, HD-C hose assembly

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Swivels DG of stainless steel

Swivels serve to avoid hose torsion (increase of life span) and help for easier handling

UTS hose assembly

on board of a foodstuff road tanker

SPANNLOC bolted safety clamps of aluminium

SC 75 Al

Oasis company building

ZVA Slimline 2

with Sight Glass

AN 51/2 SS

Welding nipple 51/2" stainless steel

ElaSil® Silicone hose assemblies

Connecting Triclamp

HB hot bitumen hose

'Brown Band', for filling of hot bitumen and heavy fuel oil. Temperature range - 25° to max. + 200° C. Meets EN 13482.

NB-ZVF 50 SR, ER 583 PTL, Aljac Closed Circuit Sampler (CCS)

Nozzle boot f. ZVF 50 with additional spout retainer

H2 Hydrogen

ERV-H2+ PN 25, DN 80 und DN 100

AKD-Hy

Coupling seal type AKD for cam locking couplings EN 14420-7. Here: of CSM

LPG Autogas Adapter (filler inlet) EURO

Push-In-Coupling EN 13670