Media Library / Images

L.P.Gas unloading of road tanker

LPG 50 hose assembly

Flexible bronze pipe connector BWO

Installed in manhole of a petrol station underground storage tank (UST). Suction pipes towards the dispenser pumps

Manifold, Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

Hose assemblies and Rubber Expansion Joints for the chemical industry

ERV-GR TA, UTL with DDC, FXD with male thread, Elaflon Plus FEP with foodstuff fitting, Elaflon PTFE with female thrad

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG30 BAYO nozzle with Bayonet connector and optional splashguard

Cargo loading of ship - various media

FWS composite hoses

GasGuard LPG nozzles: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Dantec Production hose

Composite hoses: crimping of a flanged hose coupling

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, vent hose assenbly with 'VC-LNG'

ELAPHARM Type EPH

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, black.

Ferrule threaded hose coupling M 19-1" Ms

for petrol station dispensing hoses

DDC-V 50 SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with BSP thread connection

Oasis FV103 Fill Valve, NC 104 Nozzle Coupler, CNG bus refuelling of small truck

ELAFLEX Hamburg

Assembling Spannfix hose clamps

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

GasGuard LPG nozzle GG30:

with Splashguard

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

VR Hose Reel Spring Rewind, ZVA Slimline 2 GR blue

for active Vapour Recovery (VR) for gasoline fuels

Hose Beads

BD 50, BD 63

ELAFLEX refuelling equipment for CNG and LNG

Premium refuelling equipment from ELAFLEX

ZVG 2 EURO

(Push-In-Coupling) to EN 13760. One-handed operation possible.

Scuffguard for ZVG 2 nozzles: type EA 866

with integrated fuel grade identification to European rules and large advertising/printing surface. Available in orange and black

ERV-G, DN 250 and DN 300

Yellow Band

ERV-R 80.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

SPANNLOC bolted safety clamps of stainless steel

SC 75 SS

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling