Media Library / Images

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Elapharm EPH 25

ELAPHARM electrically isolating ' I ', blue cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner.

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

HB 50 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

MannTek DGC DryGasCouplings

with integrated SBC Safety Breakaway Coupling

Slimline quality dispensing hose for the forecourt

ZVA Slimline 2 GR (vapour recovery nozzle), CSB 21 Coax Safety Break, Coax dispensing hose

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

Hose Reel spring rewind red, SL 19 black, ZVA Slimline 2 green

UTS 50 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as road tanker hose for filling AdBlue petrol station tanks

ElaSil® Silicone hose assemblies DN 13-102

For for high media purity requirements, easy to clean. Suitable for Pharma, foodstuff and cosmetics industry. Homogeneous hose construction of platinum cured, translucent and phtalate free Silicone (FDA / USP), resistant to kinking and highly flexible. Large temperature range -60° C to +200° C. Available as complete hose assembly with crimped fittings, DN 13 to 102. Here: DN 25 with Camlock Cam Locking Coupling and Triclamp connection

Slimline 16 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ERV-OR 65.25

ORANGE BAND Rubber Expansion Joint for Liquid Petroleum Gas (LPG) acc. to EN 589. For tank trucks and refuelling stations. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically dissipative.

ELAFLEX Hamburg

Mini Installation instructions, on request

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

FFBV 100, FFBV 80

MannTek Full Flow Ballvalves (FFBV), one way

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Overwing refuelling ZVA 25

ZVA Slimline 2 GR, black, guard 3 - bottom view

Urea solution for trucks: ELAFIX 40 magnet adapter in filler inlet of AdBlue tank

Safety against misfuelling (mixup with Diesel)

FWS composite hoses / hose assemblies

Type FWS PTFE with male threaded fitting, Type FWS PP with Camlock coupling, Type FWS VR with "TW" female coupler MK

ZVG 2 DISH nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Simultaneous Refuelling/Filling of Diesel and AdBlue

Picture 1

ELAFLEX Hamburg

Assembling ERV small DN

NB-ZVF 50 SR, ER 583 PTL, HD-C 38

Nozzle boot f. ZVF 50 with additional spout retainer

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

DCC Dry Cryogenic Coupling for LNG

Coupling process

VB 50 SS

TW dust plug, stainless steel